PS-58

TECHNICAL DATA:

  • Starting Pressure Range:0.5-6.0 bar
  • Max. Rated Current:10A or 16 A
  • Max.Power:1.1KW or 2.2KW
  • Max. Allowable Pressure :10 bar
  • Rated Voltage:110V or 220V
  • Frequency:50Hz/60Hz
  • Max. Ambient Temperature:40℃
  • Max. Liquid Temperature:60℃
  • Protection Degree: IP65

OPTIONS:

  • Color
  • G1” plastic pipe joint for a quick connection to water pump
  • Power cable length

DESCRIPTIONS:

  • Stop and start the pump automatically
  • Stop the pump in the case of water shortage
  • After power cut off, restart the pump automatically when the power on
  • Manual forced start
  • Over-pressure protection, stop the pump automatically when the system pressure exceeds 10 bar.
  • Automatically restart after water shortage, the restart interval time is 1 minute,30 minutes,1hour,and then 1 hour recycle.
  • Anti-stick protection, the control will start the pump automatically by 1 time in 48hours to prevent the pump get stuck. Using pressure sensor and LED display, real-time control of system pressure
  • With pressure sensor and LED display, to manager the system pressure value real-time.
  • Built-in two working mode:
  • a) Automatic mode: The control adjust the starting pressure according to the pressure in the pipe and real-time monitoring.The higher the pipe pressure, the higher the start pressure, the lower the pipe pressure, the lower the start pressure. No need manual set, with this function, can avoid the problem occur because of wrong set of start pressure, such as the start pressure set not match with the pump lift will make the pump not start normally.

It can be used for the any pump that the head from 10m-98m, confirm to rated voltage, suitable max. current and max. power. Especially appliced to multiple pressure mixed superimposed systems (such as tap water pressure or other booster pumps, etc.).Compare with the traditional pressure controller, it can reduce the occurrence of failure, thus reducing after-sales cost and more intelligent.

    • b) Normal mode: manually set starting pressure 0.5-6.0bar adjusting Wide range of adjustment, be easy to operate.
    • Joint screw: G1”male
    • It can be configured according to customer’s needs.