Efficient hydraulic design, high flow, strong head performance, and low operating noise
A reliable solution for sauna, spa, and swimming pool circulation and filtration
The VAMA V-MAX Swimming Pool Pump Series is a typical swimming pool pump designed for sauna and spa equipment, as well as swimming pool sand filter systems. The pump body, diffuser, and impeller feature an efficient hydraulic structure designed to achieve high flow, strong head performance, and low operating noise. The liquid-contacting parts are manufactured from high-reinforced engineering techno-polymer, designed to withstand the impact caused by water flow. The inlet and outlet are available with female or male threaded connections for easy connection to the piping system. The high-reinforced engineering plastic base provides vibration resistance and corrosion resistance, helping support stable operation. With flow rates up to 32 m³/h and head up to 20 m, the V-MAX series is suitable for sauna systems, spa pools, and swimming pool sand filter applications.
| Specification | Value |
|---|---|
| Product Series | VAMA V-MAX |
| Pump Type | Swimming Pool Pump |
| Maximum Flow Rate | Up to 32 m³/h |
| Maximum Head | Up to 20 m |
| Pump Body | Reinforced techno-polymer |
| Pump Bracket | Aluminum |
| Diffuser | Reinforced techno-polymer |
| Impeller | Reinforced techno-polymer |
| Pump Shaft | Stainless Steel AISI 316 |
| Mechanical Seal | Graphite / Silicon |
| Motor | Two-pole induction motor |
| Motor Speed | 2900 rpm |
| Cooling | External cooling |
| Insulation Class | F |
| Protection Degree | IP55 |
| Electrical Supply | Single-phase 220V / 50Hz |
| Thermal Protection | Available |
| Operating Mode | Continuous Service S1 |
| Inlet and Outlet | Female or male threaded connections |
High-reliability components compliant with European industrial standards.
| Component | Material |
|---|---|
| Pump Body | Reinforced techno-polymer |
| Pump Bracket | Aluminum |
| Diffuser | Reinforced techno-polymer |
| Impeller | Reinforced techno-polymer |
| Pump Shaft | AISI 316 Stainless Steel |
| Mechanical Seal | Graphite / Silicon |
| Base | High-reinforced engineering plastic |
The V-MAX series combines an efficient hydraulic design with reinforced engineering materials for reliable operation in sauna, spa, and swimming pool applications. The pump body, diffuser, and impeller use reinforced techno-polymer, while the AISI 316 stainless steel shaft provides durable mechanical performance. The reinforced engineering plastic base is designed to resist vibration and corrosion. External cooling, Class F insulation, IP55 protection, thermal protection, and continuous S1 service further support reliable operation.
For product selection, technical assistance, installation support, and warranty inquiries, contact Tervina Egypt Group: Customer Service: 19301
Install the pump on a stable and properly supported base. Connect the inlet and outlet correctly using the appropriate female or male threaded connection and ensure that all piping connections are properly sealed. Before operation, inspect the complete hydraulic and electrical system and check for leaks. Operate the pump within the specified temperature and performance limits. Regularly inspect the pump body, piping, mechanical seal, and filtration system. Maintain adequate ventilation around the motor to support proper external cooling.
