Efficient pump casing design, low noise, and durable reinforced construction
A reliable solution for hydro massage, spa, and swimming pool systems
The VAMA JA Hydro Massage Pump Series is designed for hydro massage applications, providing reliable performance for spa and swimming pool systems. The pump casing features a high-performance design focused on delivering efficient water circulation with low operating noise. Liquid-contacting parts are manufactured from high-reinforced engineering techno-polymer, providing a durable construction suitable for water circulation applications. The VAMA JA series is suitable for hydro massage tubes, spa system boosting, and swimming pool circulation or filtration systems. With flow rates up to 23 m³/h and head up to 16 m, the JA series provides dependable hydraulic performance for a range of hydro massage and spa applications.
| Specification | Value |
|---|---|
| Product Series | VAMA JA |
| Pump Type | Hydro Massage Pump |
| Maximum Flow Rate | Up to 23 m³/h |
| Maximum Head | Up to 16 m |
| Pump Body | Reinforced techno-polymer |
| Pump Bracket | Aluminum |
| Impeller | Reinforced techno-polymer |
| Pump Shaft | Stainless Steel AISI 316 |
| Mechanical Seal | Graphite / Silicon |
| Motor | Two-pole induction motor |
| Motor Speed | 2900 rpm |
| Cooling | External cooling |
| Insulation Class | F |
| Protection Degree | IP55 |
| Electrical Supply | Single-phase 220V / 50Hz |
| Thermal Protection | Available |
| Operating Mode | Continuous Service S1 |
High-reliability components compliant with European industrial standards.
| Component | Material |
|---|---|
| Pump Body | Reinforced techno-polymer |
| Pump Bracket | Aluminum |
| Impeller | Reinforced techno-polymer |
| Pump Shaft | AISI 316 Stainless Steel |
| Mechanical Seal | Graphite / Silicon |
| Liquid-Contacting Parts | High-reinforced engineering techno-polymer |
The VAMA JA series combines a high-performance pump casing design with reinforced engineering materials for reliable hydro massage and spa water circulation. The liquid-contacting components use reinforced techno-polymer, while the AISI 316 stainless steel shaft supports durable mechanical performance. External cooling, Class F insulation, IP55 protection, thermal protection, and continuous S1 service further support reliable operation.
For product selection, technical assistance, installation support, and warranty inquiries, contact Tervina Egypt Group: Customer Service: 19301
Install the pump on a stable and properly supported surface. Connect the pump correctly to the hydraulic system and ensure all connections are securely sealed before operation. Before starting the pump, inspect the complete system and check for leaks. Operate the pump within the specified temperature and performance limits. Regularly inspect the pump body, piping, mechanical seal, and circulation or filtration system. Maintain adequate ventilation around the motor to support proper external cooling.
